Cartridge & Print head Cleaner instructions for use

If a cartridge has been unused, left empty or stored for a long period of time, the nozzles may become clogged with dried ink residue. Nozzles and printheads are extremely delicate and sensitive and can be damaged easily if any material other than a specifically formulated solvent is used to clean them.

Allow print heads to soak in the Cartridge & Printhead Cleaner to refresh the print nozzles and help restore print quality.

This Cartridge & Printhead Cleaner offers an inexpensive cost method for cleaning print heads and priming print cartridges for refills. This is useful for those who have mono printers who wish to refill their existing black cartridge with a single color to enable color printing. The Cartridge & Print Head cleaner is simply injected into the cartridge in the same fashion as you would inject the ink and then withdrawn back out until all ink is removed.

There are several ways to utilize the cartridge & print head cleaner:

  1. Some cartridges require the interior to be cleaned prior to refilling. The instruction manual will specify if your cartridge requires this cleaning procedure. To clean the interior of your cartridge: Inject up to 8ml of print head cleaner into the cartridge. Install your cartridge back into the printer and print 5 test pages from print test page.
  2. Uneven printing, skipping, or no print at all may suggest clogged print nozzles. If a cartridge has been left empty or unused for an extended period of time, its nozzles become blocked with old dried ink. To soak the print head: Allow the print head to soak in 1/4" of print head cleaner for one hour. Dab the print head dry against a soft paper towel, then print 2-3 test pages from print test page.
  3. To prepare a stored cartridge for printing: Apply a small amount of Cartridge and Print Head Cleaner onto a paper towel. Allow your cartridge's print head to rest on the saturated paper towel for no more than 2 minutes. Dab the print head dry against a soft paper towel, then print.
  4. Prior to every third refill, inject 1/2 - 2ml of Cartridge and Print Head Cleaner into your cartridge. Doing so will prolong the sponge life and prevent it from collecting excess ink.

BUY our Cartridge & Print Head Cleaner - This specially formulated solvent cut through the dried ink and paper dust that can impair print quality. Rejuvinates sponge-type cartridges and restores print quality.

© 2024 Fillserv
Los Angeles, CA, USA

Brand names, logos and trademarks are used for descriptive purposes only and remain the property of their respective owners.
Their use by us does not imply endorsement by or association with the brand name owners.

Our ink and toner cartridges are either professionally remanufactured or compatible cartridges made and tested to work perfectly in your inkjet printer or laser toner printer. We offer our customers substantial savings over buying original inkjet cartridges and laser toner cartridges, with savings often up to 85% off the OEM cartridge cost. We also offer our customers alternative options - you can buy remanufactured cartridges or compatible cartridges, or you can refill your own cartridges with our inkjet and toner refill kits.