xTool SafetyPro AP2 / AP2 Max Air Purifier with SuperCyclone

Product Description

xTool SafetyPro™ AP2 Air Purifier with SuperCyclone System

Powerful fume, dust & odor filtration built for demanding workflows-keep your apparel printing, DTF powdering, and workspace clean and safe.

Key Features

• SuperCyclone Separation: Centrifugal pre-filtering that captures large particles before they reach the main filters-extending filter life up to 10x.
• Multi-Layer Filtration: 6- to 7-layer system (depending on version) removes fine dust (0.3 µm), PM2.5, VOCs, toluene and odors down to 99.97% + efficiency.
• High Airflow Capacity: Models available for moderate volumes (150 m³/h) up to heavy workloads (700 m³/h in AP2 Max) for robust workshops.
• Quiet & Smart Operation: Operates around 55 dB, has auto-on/off features, syncs with supported machines and material types for optimized performance.
• Workshop-Ready Design: Includes wheels, magnetic filter door for quick changes, and hose port for exhaust or internal recirculation setups.

Specifications

• Filtration Layers: 6 (standard AP2) / 7 (AP2 Max)
• Airflow Rating: Up to 150 m³/h (AP2) / ~700 m³/h (AP2 Max)
• Noise Level: ~55 dB (quiet operation)
• Weight: ~20.7 kg / 45.6 lb for AP2 (per one spec listing)
• Control Modes: Touch button panel, 4 speed/gear settings, optional wireless dongle for sync.

Why It Works for Your Apparel/DTF Setup

When operating a DTF apparel printing line (film printing, powder application, curing, pressing), you generate fine particulate dust (adhesive powder), inks and possible off-gassing from substrates and adhesives. The SafetyPro AP2 helps:

• Maintain clean air free from powder haze-protecting operators, machinery optics and air quality.
• Reduce sticky film path contamination by capturing overspray and airborne particles before they settle.
• Ensure safer workspace compliance and better ventilation support, especially in indoor studios or shared spaces.

Installation & Setup Tips

1. Place the AP2 near your powder or curing station to capture air before it disperses into the room.
2. Connect exhaust hose if required-either vent to outside or recirculate filtered air indoors depending on local code.
3. Turn on auto-mode if your printer supports synced operation-this suspends AP2 operation when machine is idle, saving runtime and filter life.
4. Monitor filter status via panel or app; clean the cyclone pre-filter regularly for best performance.